Surveillance cameras remote monitoring can it? How to load?

To achieve remote monitoring, first determine that the equipment used to support remote monitoring means. security cameras systems For now, there are only two ways: one is IE remote monitoring, remote monitoring one is the client; a lot of hard disk recorders support both IE and client remote monitoring. Here, we embedded DVR, for example, describes the use of DVR remote monitoring method:
First, the equipment ready:
We first need to connect to the network DVR. Currently, the majority of small and medium enterprises, offices, homes are using ADSL, and most economical way is to use ADSL. So we want to achieve remote monitoring, hard disk video recorder is the most basic needs of the ADSL broadband network. security cameras ADSL in the opening, we also need a router that supports DDNS feature (unless you use the DVR for the ADSL, there is no need to access other computers and devices), according to our use of the situation, TP-LINK router series Yes, price and stability is better, methods of operation is relatively simple, here also the TP-LINK410 router, for example. This preliminary work is required to do:
1, ADSL can be opened and normal use, remember ADSLde Internet user name and password;
2, TP-LINK410 router installation (more than four computers the user can select R810 or other support DDNS router), connect the computer and hard disk recorders, set in accordance with instructions for the router, the router means of access is set to "automatically connect" via computer check can be normal, ready to enter the DVR's remote control settings:
Second, the DVR remote control to set the IE:
1, check the DVR's network connection is smooth, proper operation:
Connect the network cable to the DVR, turn on the power. Accordance with manual operation, set to enter the DVR interface, enter "Network Settings":video surveillance camera
Select the "type" → "Static IP": Move the cursor keys to fill in or modify the location,
Static IP will modify: "192.168.1.117" → confirm (if the DVR is the factory's IP 192.168.1.117, you may need to change here, Note: IP addresses of IP segments according to your network settings)
→ The gateway changes to "192.168.1.1" → Confirm
→ The "Subnet Mask" was changed to "255.255.255.0" → Confirm
Temporarily not modify other settings, "OK" to exit.
2, check whether DVR in LAN access, browsing is normal:
First, open the IE browser interface:
Choose to enter the "Tools"
→ "internet options ..."
→ "Security"
→ "Custom Level (C) ... ..." ... ...
The "activeX controls and plug-ins," the following seven options Select the "Enable"
→ "OK" to exit
Now, in IE's address bar enter "192.168.1.117" → Enter
Wait, the computer will prompt you to download and install plug-in, click "Install" (if you have a firewall like install shield software, temporarily turn off, install the plug-in to complete before opening);
After the installation of plug-ins, pop-up connection dialog box, select Select the default user name and password, just click "OK" to see the monitor screen!
Note: If you are not prompted to install the plug-in or can not access that network with connection problems, please check;
If the network connection, the display screen appears stripes, on the click "OK" before select "Option", check "Enable Overlay", then click "OK", you can monitor the normal display screen;
3, remote monitoring into the router settings:
Above, we can use the computer Internet, has seen the monitor screen in the local area, that our network connection is working. Now you can access the router's remote monitoring set up:
In the IE address bar enter: "192.168.1.1", enter the router, click on "forwarding rule", according to the following order fill in the following figure, and save: click: "DMZ host", fill in the IP address is "192.168.1.117 "Check the back of the" Enabled "and save.
Click on "dynamic DNS", fill in the application for good dynamic domain name , user name, password, check "Enable DDNS", click after click to save: "Login." At this point, you can use for remote monitoring of the dynamic domain name.